36mm Nema 14 DC Brush Gear Motor 24V 240RPM
Litlhaloso
| Lebitso la Sehlahiswa | Dc Brush Gear Motor |
| Tšebeliso | tshebediso e iketsang |
| Torque | 0.64 NM |
| Kaho | Magnet e sa feleng |
| Sireletsa Sebopeho | IP40 |
| Lebelo(RPM) | 240 ± 15% |
| Lebelo le se nang mojaro | 300±10%rpm |
| Tsoela Pele(A) | ≤2.5A |
| Matla a lekantsoeng | 24V |
| Karolelano ea Phokotso | 25:1 |
| E mamella voltage | AC600V/1 mA/1S |
Tlhaloso ea Sehlahisoa
36mm Nema Brush Gear Motor 24V 240RPM
Enjene e na le torque ea 0.64NM le lebelo la 240 rpm.
Sesebelisoa se seng le se seng se na le litlhoko tse ikhethileng tsa lebelo le torque.Ha mojaro o hloka torque e phahameng ka lebelo le tlase, ts'ebeliso ea enjene e kholo ea DC e khonang ho nts'etsapele torque e ka se be ntle le ts'ebetso ea sistimi e ka ba tlase.Tharollo e betere maemong a joalo ke ho hlahisa enjene e nyane ea dc e nang le gearing, e ikamahanyang le moroalo bakeng sa lebelo, torque kapa inertia.Sebetsa sa DCkopano ea motor le gearbox, kapa torque e phahameng ea DC gear, e tla fana ka katleho e kholo tharollong ea moruo.
Tlhaloso ea Motlakase
| Mohlala | 36mm Brush gear enjene36PG3857-XXXX-25K-1 |
| Voltage (V) | 24V |
| Torque e lekantsoeng ka lebokose la gear (NM) | 0.64 Nm |
| Lebelo le Lekanyelitsoeng (rpm) | 240 ±15% |
| E lekantsoe Curremt (A) | ≤2.5 A |
| E mamella voltage | AC600V/1 mA/1S |
| Boholo ba makoloi (mm) | 36*36*92 limilimithara |
Mechanical Dimension
Karolelano e 'ngoe ea phokotso ea 36mm phofo ea metallurgy gearbox
| Tlhaloso ea Motlakase ea 36mm Gearbox: | |||||||||
| Karolelano ea ho fokotsa | 5 | 16 | 10 | 25 | 53 | 62 | 76 | 94 | 117 |
| Palo ea literene tsa likoloi | 1 | 2 | 3 | ||||||
| Phetiso e sebetsang hantle | 81% | 72% | 65% | ||||||
| Torque e lekantsoeng ea mamello | 0.3Nm | 1.2 Nm | 2.5 Nm | ||||||
| Torque e kholo ea mamello ea nakoana | 1 Nm | 3.5 Nm | 7.5 Nm | ||||||
| bolelele (mm) | 24.8 | 32.4 | 41.9 | ||||||
| Boima ba 'mele (g) | 145 | 173 | 213 | ||||||
| Boholo ba radial load(10mm form flange) | ≤120N | ||||||||
| Boholo ba shaft axial load | ≤80N | ||||||||
| Thepa ea matlo | Metallurgy ea phofo | ||||||||
| Ho beha litholoana | dibering tsa sleeve | ||||||||
| Shaft press-fit force max | ≤500N | ||||||||
| Radial play of shaft(mm) | ≤0.03 | ||||||||
| Ho bapala ka shaft (mm) | ≤0.1 | ||||||||
| Ho khutlela morao ha ho na moroalo (°) | ≤1.5 | ||||||||
*** Tlhokomeliso: Lihlahisoa li ka etsoa ka kopo ea hau.Ka kopo ikopanye le rona bakeng sa lintlha tse ling.
Mokhoa oa Tlhahiso
Lisebelisoa tsa tlhahiso
Ho paka le ho Romela
