36mm Nema 14 DC Burush Gear Motor 24V 240RPM
Tilmaamaha
| Magaca Alaabta | Dc Brush Gear Motor |
| Isticmaalka | codsi toos ah |
| Torque | 0.64 NM |
| Dhismaha | Magnet Joogtada ah |
| Ilaalinta Muuqaalka | IP40 |
| Xawaaraha (RPM) | 240 ± 15% |
| Xawaar la'aan | 300± 10% rpm |
| Hadda Joogta ah (A) | ≤2.5A |
| danab la qiimeeyay | 24V |
| Saamiga dhimista | 25:1 |
| U adkeyso danab | AC600V/1 mA/1S |
Sharaxaada Alaabta
36mm Nema Brush Gear Motor 24V 240RPM
Matoorku waxa uu leeyahay wareeggu yahay 0.64NM iyo 240 rpm.
Codsi kastaa wuxuu leeyahay shuruudo gaar ah oo ah xawaaraha iyo qulqulka.Marka rarku u baahan yahay qulqulka sare ee xawaaraha hooseeya, isticmaalka matoor weyn oo DC ah oo awood u leh inuu horumariyo qulqulka ma noqon doono mid ku habboon oo waxtarka nidaamku wuu yaraan doonaa.Xalka ugu fiican ee xaaladahan oo kale waa in la soo bandhigo matoor yar oo dc ah oo leh qalabaynta, la qabsiga mootada culeyska xawaaraha, qulqulka ama firfircoonida.burushka DCmootada iyo sanduuqa gearbox, ama qulqulka sare ee DC gear motor, ayaa ku siin doona waxtar weyn oo xal dhaqaale ah.
Tilmaamaha Korontada
| Qaabka | 36mm matoorka marsho caday36PG3857-XXXX-25K-1 |
| Voltage (V) | 24V |
| Torque lagu qiimeeyay sanduuqa gearbox (NM) | 0.64 Nm |
| Xawaaraha la qiimeeyay (rpm) | 240 ± 15% |
| Lagu qiimeeyay Curremt (A) | ≤2.5 A |
| U adkeyso danab | AC600V/1 mA/1S |
| Cabbirka Matoorka (mm) | 36*36*92 mm |
Cabirka Makaanikada
Saamiga kale ee dhimista ee sanduuqa qalabka biraha budada ah ee 36mm
| 36mm Gearbox Qeexida Korontada: | |||||||||
| Saamiga dhimista | 5 | 16 | 10 | 25 | 53 | 62 | 76 | 94 | 117 |
| Tirada tareenada qalabka | 1 | 2 | 3 | ||||||
| Waxtarka gudbinta | 81% | 72% | 65% | ||||||
| Dhibicda dulqaadka lagu qiimeeyay | 0.3Nm | 1.2 Nm | 2.5 Nm | ||||||
| Xawliga dulqaadka ugu sarreeya | 1 Nm | 3.5 Nm | 7.5 Nm | ||||||
| dhererka (mm) | 24.8 | 32.4 | 41.9 | ||||||
| Miisaanka (g) | 145 | 173 | 213 | ||||||
| Culayska shucaaca ugu badan (10mm flange) | ≤120N | ||||||||
| Culayska axial shaft Max | ≤80N | ||||||||
| Qalabka guryaha | Biraha budada | ||||||||
| Wax-soo-saarka | gacmo-gashiyada | ||||||||
| Shaft press-fit force max | ≤500N | ||||||||
| Ciyaarta shucaaca ee usheeda dhexe (mm) | ≤0.03 | ||||||||
| Ku ciyaarista usheeda dhexe (mm) | ≤0.1 | ||||||||
| Dib-u-celinta oo aan raar lahayn (°) | ≤1.5 | ||||||||
*** Xusuusin: Alaabta waxaa lagu beddeli karaa codsigaaga.Fadlan nala soo xiriir wixii faahfaahin ah.
Habka wax soo saarka
Qalabka wax soo saarka
Baakad&Gayn
